Wire rope gourd slip line failure approach
The wire rope gourd application is very extensive. Mill have occurred in parts of the wire rope electric hoist line failure, the inconvenience to the inspection work. Now introduce a self-designed a simple and practical electric hoist line installation method.
1Electric hoist is installed in a U-shaped track. For this feature, the cable layout in the middle of the track, I-beam upper. Vertebral 10mm wire rope or round cable ends with baskets bolts.
2The sliding ring two rings linked together, there is a margin in order to avoid the cable scratch cards. The steering ring of two rings connected with a bolt, freely rolling.
3 a steering ring at one end sets tightrope, after leaving a good motor leads rubber line is fixed at the bottom of the steering ring. Then multiple one end of the slip ring to wear on the cable, then rubber set of line segments fixed at the lower end of the slip ring. The front end connected to the motor, can roll freely. After terminating the power supply.
3Traction motor, to turn to the ring for the central traction cable straight line or circular motion.
5 straight track may also be used the above method.